Califone Portable CD Player 01 0810 User Manual

Model CD-102  
Portable CD Player  
User Manual  
 
Model CD-102 Portable CD Player  
Thank you for purchasing the Califone® Model CD-102 Portable CD  
Player.  
product for its warranty coverage, to sign up to receive our  
newsletter, download our catalog, and learn more about the complete  
line of Califone audio visual products, including portable and installed  
wireless PA systems, multimedia players and recorders, headphones  
and headsets, computer peripheral equipment, visual presentation  
products and language learning materials.  
califone.com  
1
 
IMPORTANT  
IMPORTANT SAFETY INSTRUCTIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may  
cause undesired operation.  
The CD circuitry may cause interference to nearby radios. To prevent  
interference, either switch the CD player off or move away from the  
affected radio.  
NOTE: This equipment has been tested and found to comply within the  
limits for a class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Before using this product, read the instruction manual for important safety  
information. Please retain this manual for future reference and warranty  
information.  
Troubleshooting & Servicing  
Do not attempt to service or repair the device yourself. Refer all servicing  
to qualified service personnel. Do not attempt to modify the device in any  
way. Doing so could invalidate your warranty.  
Moisture and heat sources  
Do not use this apparatus near water (for example, sinks, baths, pools) or  
expose it to rain, moisture, dripping or splashing liquids. Do not expose  
the unit to high temperatures, high humidity or direct sunlight.  
Cleaning  
When cleaning the device, please use a soft, dry cloth. Never use  
benzene, paint-thinner, or other chemicals on the device.  
Location  
Place the device in stable location, so it will not fall causing damage to  
the device or bodily harm.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio / TV technician for  
help.  
Intended use  
The product may only be used with the original parts intended for it. The  
product may only be used in closed and dry rooms. The intended use  
includes adherence to the specified installation instructions. The  
manufacturer accepts no liability for damage arising due to improper use.  
SAFETY CERTIFICATION  
This Compact Disc Player is made and tested to meet safety standards  
of the FCC, requirements and compliance with safety performance of  
the U.S. Department of Health and Human Services, and also with FDA  
Radiation Performance Standards 21 CFR Subchapter J.  
LASER SAFETY  
ThisunitemploysanopticallaserbeamsystemintheCD mechanism,  
designed with built-in safeguards. Do not attempt to disassemble;  
refer to qualified service personnel. Exposure to this invisible laser  
lightbeam may be harmful to thehuman eye.  
INVISIBLE LASER RADIA-  
TION W HEN OPEN A ND  
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS,  
INTERLOCK F AILED OR  
OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE  
DEFE ATED. A VOID D I-  
SPECIFIED HEREIN, MA Y RESULT IN HAZARDOUS LASE R  
RECT EXPOSURE T O  
LIGHT BEAM EXPOSURE.  
LASER BEAM.  
califone.com  
califone.com  
2
3
 
PACKAGE CONTENTS  
SETUP AND INSTALLATION  
The following materials are included.  
BATTERY OPERATION  
CD-102 Portable CD Player  
Power Adapter  
1. Open the battery compartment cover and insert two “AA” alkaline  
batteries inside the battery compartment. Follow the polarity as  
indicated in the battery compartment.  
2. Close the battery compartment cover.  
Caution:  
2 Alkaline AA batteries  
3060AV Headphone  
User Manual  
Do not attempt to recharge, short-circuit, disassemble, heat or  
throw the batteries into a fire.  
During store when batteries will not be used for an extended  
period of time. Be sure to remove them to avoid possible damage  
caused by battery leakage and corrosion.  
Unpacking the Unit  
Inspect the unit once the packaging has been opened for any damage oc-  
curred during shipping & contact us immediately. Please keep the packing  
material for further use.  
Do not mix alkaline, standard (carbon-zinc), or rechargeable  
batteries.  
Do not try to recharge batteries not intended to be recharged;  
they can overheat and rupture. (Follow the battery manufacturer’s  
directions).  
Dispose of old batteries properly in accordance with local laws.  
Low Battery  
When the battery indicator appears in the LCD panel, this means  
that the batteries are losing their charge. In this case the CD  
player will not function properly and the batteries must be  
replaced.  
AC OPERATION  
1. Insert the DC plug, at the end of the AC adapter cord into the DC  
input jack.  
2. Plug the AC adapter into AC power outlet socket. Use only with  
the 6V AC adapter and make sure the local voltage corresponds  
on the adapter’s required AC input voltage.  
Note: If the AC plug of this unit does not fit in your AC outlet, a plug  
adapter (not supplied) should be used. Consult your local dealer on the  
type of plug adapter required.  
1. LCD Display  
9. Battery Door  
2. Program Button  
10. Earphone Jack  
11. Volume Control  
12. CD Door Open Switch  
13. Bass Boost Switch  
14. Hold Switch  
3. Mode Button  
4. CD Skip Backward Button  
5. ANTI-SHOCK Button  
6. CD Stop Button (Power Off )  
7. CD Play/Pause Button (Power On)  
8. CD Skip Forward Button  
CONNECTING HEADPHONES  
1. Decrease the volume to minimum.  
15. DC Input Jack  
2. Connect the earphones to the PHONES (GREEN) jack.  
3. Increase the volume to the desired listening level.  
Caution: Avoid excessive volume for long periods of time as this can  
result in hearing damage.  
califone.com  
califone.com  
4
5
 
HANDLING COMPACT DISCS  
This unit is designed to play only compact discs bearing the  
following identification logo.  
MAINTENANCE  
CLEANING THE CABINET  
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a  
weak solution of neutral detergent and water, and then wipe clean.  
Other discs may not conform to the CD standard and may not play  
properly.  
Dirty, scratched or warped discs  
may cause skipping or noise.  
Handle the disc only by the edges.  
To keep clean, do not touch its  
surface.  
Discs should be stored in their  
cases after use to avoid serious  
scratches.  
INSERT WITH  
THE LABEL  
FACING UP.  
CLEANING THE LENS  
A dirty lens will cause sound skipping and if the lens is very dirty, the CD  
may not work. Open the disc cover and clean the lens as below:  
PRESS THE CLAWS  
ATTHE CENTER OF  
THE DISC CASE.  
Dust or Dry Particles  
PRESS THE  
DISC GENTLY  
TO INSERT IT.  
LIFT OUT WITHOUT  
TOUCHING THE  
RECORDED SURFACE.  
Using a camera lens brush/blower, blow on the lens several times  
and wipe it lightly with the brush to remove dust. Blow on the lens one  
more time.  
Fingerprints  
INCORRECT  
Do not expose disc to direct  
sunlight, high humidity, high  
temperature, dust, etc.  
If the lens cannot be cleaned by using a brush/blower, use a dry  
cotton swab starting from the middle and working to the outside edge.  
CORRECT  
INCORRECT  
Prolonged exposure to extreme  
temperatures can warp the disc.  
Do not stick or write anything on  
either side of disc. Sharp writing  
instruments or the inks  
FROM THE CENTER TO THE EDGE  
used in some felttip pens may  
damage its surface  
Remove the disc  
To pick up the disc, hold the edge  
and gently press the center pivot  
as illustrated.  
Caution:  
Wait for the disc to stop rotating before  
pressing the OPEN button.  
Note: This unit can play 3” (8cm) single CDs without an adapter. Do not  
use a CD single adapter for these discs.  
CLEANING DISCS  
Finger prints should be carefully wiped from  
the surface of disc with a soft cloth. Unlike  
conventional records, compact discs have  
no grooves to collect dust and microscopic  
debris, so gently wiping them with a soft  
cloth should remove most particles. Wipe in  
a straight motion from the center to the edge.  
Never use thinner, benzine, record cleaner or anti-static spray on a com-  
pact disc. Such chemicals can damage its plastic surface.  
califone.com  
califone.com  
6
7
 
BASIC DISC PLAY  
LCD DISPLAY INFORMATION  
This CD-player can play Audio Discs such as CD-Recordables and CD-  
Rewritables.  
DO not try to play a CD-ROM, CDi, VCD, DVD or computer CD.  
1. Connect the earphones to the PHONES (GREEN) socket.  
2. Press the OPEN button to open the CD compartment lid.  
3. Adjust the VOLUME to minimum.  
WHEN POWER IS ON  
If a disc is in, auto adjustment starts.  
During adjustment, display shows - -.  
If no disc is in, disc is displayed.  
Put the disc in and close the lid.  
Auto adjustment starts.  
4. Insert the disc with the label side facing up.  
5. Close the lid securely until a click is heard.  
6. Press the PLAY button to start playing.  
If the lid is open, display shows OPEN.  
Closing the lid starts auto adjustment.  
To Emphasize the bass sound  
Set the BASS BOOST switch to the ON position.  
Note: The bass boost performance will depend on  
the VOLUME control setting.  
If unable to read TOC then Er is displayed.  
Note: TOC means Table Of Contents.  
When TOC data has been read, display  
shows TOC for 1 second.  
HOLD Switch  
This switch prevents accidental selection of an unwanted  
function during Playback or Stop mode. In the HOLD  
“ON” position, no function button on the unit can be  
operated (except OPEN). Moving the switch to the “OFF”  
position will allow the unit to return to normal operation.  
To turn on anti-shock press ANTI-SHOCK  
key play, ANTI-SHOCK will start. To turn  
anti-shock off press ANTI-SHOCK key again,  
the will disappear on the display.  
Turning Power on and off  
This unit has no ON/OFF switch. To turn on and off, press the following  
buttons.  
TO PLAY FROM STOP CONDITION  
To turn on: Press >II PLAY/PAUSE (playback starts).  
To turn off: Press STOP button once for standby mode.  
Press STOP button twice to turn off the power.  
Press the PLAY/PAUSE button. The display  
changes to 01 00:00 and starts play.  
When the memory is full, stops flashing.  
Auto power-off function  
When the unit is stopped (standby mode) for approximately 30 seconds,  
the power will automatically turn off.  
TO STOP  
Press the STOP button. This will stop play and  
the TOC will be displayed.  
TO PAUSE  
Press the PLAY/PAUSE button and the pause  
on/off button alternately. When the unit is  
paused, the time display will flash.  
califone.com  
califone.com  
8
9
 
REPEAT/PLAY MODES  
Every time the MODE button is pressed, the corresponding mode  
appears in the display window.  
INTRO PLAY  
1. Press the MODE button three times; INTRO  
will display.  
2. Press the PLAY/PAUSE button, starts INTRO  
play from track no.01.  
3. Select INTRO mode during play; INTRO starts  
flashing.  
Press the PLAY/PAUSE button. Flashing will  
stop and INTRO play will start from track no.  
01.  
Press >>I to play the current track. Flashing  
will stop, and INTRO play will start from next  
track.  
Press I<<. Flashing will stop and INTRO play  
will start from current track.  
PROGRAM PLAY  
This allows selected tracks on the disc to be played in any desired  
order.  
To set the program play  
Programming can be set in the STOP mode or normal play mode.  
Shown on the LCD display. The  
current track on the disc will be  
repeated.  
1. Press the PROG button; PROGRAM will start  
flashing.  
2. Press I<< or >>I to select the desired track.  
3. When the desired track is displayed, press  
the PROG button to register. The track No.  
display changes to 00 again.  
Shown on the LCD display. All  
tracks on the disc will be  
repeated.  
4. Repeat steps 2 and 3 to program the order of  
more tracks. Up to 20 tracks can be  
programmed into memory.  
NOTE: In normal mode, none of the above mode symbols will be  
shown in the display.  
NORMAL PLAYBACK  
To complete programming and start playback  
Press the PLAY/PAUSE button. PROGRAM will  
stop flashing and playback will begin.  
During normal playback a  
appears on the display when the batteries  
need to be changed.  
indicator  
To clear programming  
Register 00 on the first program track.  
Open the door.  
Power Off  
califone.com  
califone.com  
10  
11  
 
RANDOM PLAY  
USING ANTI-SHOCK (ESP) PROTECTION FEATURE  
Enables all the tracks on a disc to be played in a  
Random(Shuffle) sequence.  
1. Press the MODE button four times; RANDOM  
will display.  
2. Press the PLAY/PAUSE button. The Track No.  
is selected at random and will begin to play.  
3. To select RANDOM mode during play,  
RANDOM starts flashing.  
When activated the Anti-Shock (ESP) system immediately begins to store  
a buffer of sound data in the memory. The ESP indicator flashes until the  
memory is full.  
When the laser loses tracking due to mechanical shock, the CD reading  
will be interrupted, but the audio playback will remain stead due to the  
memory buffer.  
CAUTION  
Press the PLAY/PAUSE button I<< or >>I.  
Flashing will stop and RANDOM play will begin.  
If the unit is subject to excessive and continuous repeated shocks, it will  
cause the sound to skip.  
NOTES  
SEARCH FUNCTION  
When the “ANTI-SHOCK (ESP)” mode is operating, the battery con-  
sumption is higher because the disc rotates faster than normal and the  
memory circuit is activated.  
When the digital anti-shock function is switched “ON” or “OFF”, the  
sound will be interrupted. This is normal.  
Remember that conditions such as dirty, scratched or warped discs  
may cause skipping or noise, thereby affecting performance of the  
“ANTI-SHOCK (ESP)” system.  
Locating a Particular track  
To go back to the beginning of the  
current or a previous track  
Press I<< lightly and repeatedly.  
To go to beginning of the following Press >>I lightly and repeatedly.  
track  
Skip protection greatly reduces or eliminates skipping during activity  
such as walking/running/driving. During such use, it’s best to hold the  
compact disc player with the OPEN switch facing upward.  
Locating a Particular Point in a track  
To search backward at high speed Keep I<< depressed.  
To search forward at high speed  
Keep >>I depressed.  
Low level audio will be heard during the search process to assist in locating  
the correct point in the track.  
califone.com  
califone.com  
13  
12  
 
SPECIFICATIONS  
PICK UP  
Laser diode Material:  
Properties Wavelength:  
Emission duration:  
Laser output:  
GaAlAs  
λ=780mm  
continuous  
<44.6 µW  
Error correction:  
Cross-interleave Reed-solomon code  
AUDIO  
D/A conversion:  
Frequency response:  
Wow and flutter:  
No. of Channels:  
Output level Phones:  
Bass boost effect:  
DAC with four times oversampling  
20-20,000Hz (+1/-3 dB)  
Below measurable limits  
2 Channels (Stereo)  
15mW (32Ω)  
(100Hz) + 6 dB  
GENERAL  
Power requirements:  
Power adapter plug type:  
Power consumption:  
Dimension Approx.:  
Weight Approx.:  
2 “AA” alkaline batteries OR 6VDC 300 mA power adapter  
EIAJ, center hole φ 1.7mm, outside φ 4.0mm  
0.8W (DC 3V) under normal conditions  
144 x 140 x 27 mm  
200g not including battery  
WARRANTY  
Califone warrants this product to be free from defective material and  
workmanship for one year from the purchase date. Our “Project Intercept”  
Customer Satisfaction program will replace defective parts and repair  
malfunctioning equipment under this warranty when the defect occurs  
under normal use.  
All Damage Claims Must Be Made With the Freight Carrier  
Notify the freight carrier immediately if you observe any damage to the  
shipping carton or product. Repack the unit in the carton and await  
inspection by the carrier’s claim agent. Notify your dealer of the pending  
freight claim.  
Returning Your Unit for Service or Repairs  
Should your unit require service, contact our Customer Service Department  
online at califone.com/techsupport or via email [email protected] or  
by phone at 800-722-0500 / 818-407-2400 to first obtain an RA (Return  
Authorization) number before returning it to Califone. The unit must be  
returned to our factory via prepaid transportation only after the factory  
issues an RA number, which must be clearly written on the outside of the  
box.  
califone.com  
14  
 

Black Box Switch Code Operated Switch 16 User Manual
Bosch Appliances Microwave Oven HBL54 User Manual
Bosch Appliances Security Camera NDN 932 User Manual
Braun Juicer 4161 User Manual
Broilmaster Kitchen Grill FKCHAR User Manual
Brother Fax Machine FAX 575e User Manual
Cadillac Automobile 2006 CTS User Manual
Canon Projector LV S2 User Manual
Casio Electronic Keyboard CDP 120 User Manual
Chief Manufacturing Indoor Furnishings CMS440P User Manual