Bogen Car Speaker FMH15T User Manual

FMH15T  
Flange Mounted, 15W,  
Horn Loudspeaker  
Installation Instructions  
The FMH15T is designed to be mounted by its flange. Figure 1 shows the mounting hole  
locations.  
Components  
Bogen recommends using the SGHD8 Grille with the FMHAR8 Adapter Ring for proper  
mounting of the horn.The SGHD8 Grille will mount to the BBFM6 Flush Mount Enclosure  
or BBSM6 Surface Mount Enclosure. See Figure 3 on other side for mounting details.  
1. Make the electrical connections (see Figure 2). Connect the 70V or 25V “hot” lead to the  
#1 terminal and the system common lead to the #2 terminal. Follow this pattern on all  
similar speakers to ensure proper phasing; however, the speakers will work perfectly well  
if the connections are reversed.  
Figure 1  
2. Adjust the tap selector switch to the desired wattage using the chart below.  
TAP SET 70V WATTS 25V WATTS  
1
2
3
4
5
6
7
8
0.9  
1.8  
3.6  
7.5  
15  
0.125  
0.25  
0.5  
0.9  
1.8  
Figure 2  
7.0  
*
15  
*
*
*
IMPORTANT  
* Do not use these positions  
© 2005 Bogen Communications, Inc.  
Specifications subject to change without notice.  
54-2137-01A 0505  
 

Bionaire Electric Heater BCV2000 User Manual
Blue Sea Systems Air Conditioner PN 8408 User Manual
Bushnell Hunting Equipment 98 2293 05 12 User Manual
Cables to Go Network Card 1000TA TPC User Manual
Cabletron Systems Switch 6C105 User Manual
Campbell Hausfeld Impact Driver TL0502 User Manual
Canon Photo Printer CP800 User Manual
Canon Projector LE 5W User Manual
Casio Digital Camera EX S20 User Manual
CFM Fan AFK 0906 User Manual